- Home
- ยป
- Products & Services
- »
- Infrared Temperature Sensors
Infrared Temperature Sensors
D203s PIR Sensor
Minimum Order Quantity: 500 Piece
Model | D203s |
Detection Distance | 8 meter |
I Deal In | New Only |
Working Temperature | -20 to +80 Deg C |
Material | PVC |
Dimension | 9.2 x 4.4mm |
Weight | 3 g |
Uses | PCB |
Product Name : PIR Infrared Sensor;Model No. : D203S;
Encapsulation Type : TO-5;IR
Receiving Electrode : 2x1mm, 2 elements
Window Size : 4x3mm;Spectral Response : 5-14um;
Transmittance : 75%;Signal Output(Vp-p) : 3500mVSensitivity : 3300V/W;
Detectivity(D*) : 1.4 x 10 8cmHz 1/2 /W;
Noiset(Vp-p) : 70mV;Output Balance : 10%
Offset Voltage : 0.3-1.2V;Supply Voltage : 3-15V;
Operating Temp. : -30 to +70C;Storage Temp. : -40 to +80CBody Size : 9.2 x 4.4mm / 0.36" x 0.17"(Dia.*T);
Pin Size : 0.45 x 13.4mm / 0.018" x 0.53"(Dia.*L);
Weight : 3g;Package Content : 2 Pcs x PIR Infrared Sensors
Additional Information:
- Production Capacity: 10000
- Delivery Time: TWO DAYS
- Packaging Details: TUBE
MPU6050 6 Axis Accelerometer Module
Colour | As shown in the image |
Acceleration range | +-2g, +-4g, +-8g, +-16g |
Pin counts | 8 |
Package contains | 1 X MPU6050 Module |
Product type: | Accelerometer with gyroscope |
Chip | MPU6050 |
mpu6050 has MEMS accelerometer and MEMS gyro with complete 6-axis motion tracking in a single package. It has 16-bits analog to digital conversion hardware for every channel, which helps to capture X, Y and Z axis or channel at the same time and it is very accurate. This module is compatible with Arduino, AVR, PIC, ARM, Raspberry Pi, and any other processor and controller and uses a 12C bus to the interface.
LM35 Temperature Sensor
Usage/Application | Temperature Measurement |
Type | Leaded |
Part Number | LM35 TEMPERATURE SENCER |
Model Name/Number | LM35 TEMPERATURE SENCER |
Range | -55 To 150 Degree Celsius Range |
Additional Information:
- Production Capacity: 10000
- Delivery Time: two bays
- Packaging Details: box
Dci Infrared Temperature Sensor Gy Mlx90614
Model Number | MLX90614 |
Temperature Range | 40 to 125 Deg C |
Accuracy | 0.02 Deg C |
Application | Temperature Measurement |
Supply Voltage | 3 to 5V |
Range | 2 to 5 cm |
MLX90614 Temperature Sensor SpecificationsOperating Voltage: 3.6V to 5V (available in 3V and 5V version)Supply Current: 1.5mAObject Temperature Range: -70degreeC to 382.2 degreeCAmbient Temperature Range: -40degreeC to 125 degreeCAccuracy: 0.02 degreeCField of View: 80 degreeDistance between object and sensor: 2cm-5cm (approx.)
Note: More Technical details about the MLX90614 sensor can be found in the MLX90614 datasheet linked at the bottom of this page.
Alternative for MLX90614: MLX90615, ZTP115, TPIS 1S
Alternate Ambient Temperature Sensors: DHT11, DHT22, PT100, TMP36, DS18B20
Where to use the MLX90614 Temperature sensorThe key feature of MLX90614 is that it is a contactless IR temperature sensor with high accuracy. So it can be used in industries to measure the temperature of moving objects like a rotating motor shaft. Due to its high accuracy and precision, it is also used in a wide range of commercial, health care, and household applications like room temperature monitoring, body temperature measurement, etc.
MLX90614ESF-BAA-000-TU-ND is an infrared thermometer for non-contact temperature measurements. It can use with any microcontroller that can communicate with it through it's I2C interface.
Features:
Easy to integrateMounted on a breakout board with two types of pins10k Pull up resistors for the I2C interface with optional solder jumpersFactory calibrated in temperature range:-40+125 degreeC for sensor temperature-70+380 degreeC for object temperatureHigh accuracy of 0.5 degreeC over wide temperature range (+50 degreeC for both) High (medical) accuracy calibrationMeasurement resolution of 0.02 degreeCSingle and dual zone versionsSMBus compatible digital interfaceCustomizable PWM output for continuousreadingDifferent package options for applications and measurements versatilityApplications:
High precision non-contact temperature measurementsAutomotive blind angle detectionMultiple zone temperature control - up to 127sensorsThermal relay / alertMovement detectionLivestock monitoringBody temperature measurement
SKS STORE
Additional Information:
- Production Capacity: 1000
- Delivery Time: three days
- Packaging Details: box
Melexis Mlx90614 Infrared Temperature Sensor , -70 to 382.2 DegC
Product Brochure
Brand | Melexis |
Model Number | mlx90614 |
Temperature Range | -70 to 382.2 DegC |
Power Consumption | 5 V |
Range | 2-5 cm |
Usage/Application | measure the temperature |
Supply Voltage | 3 to 5V |
I Deal In | New Only |
The MLX90614 is an infrared thermometer for non-contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal conditioning ASIC are integrated in the same TO-39 can. Integrated into the MLX90614 are a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.
The thermometer comes factory calibrated with a digital SMBus output giving full access to the measured temperature in the complete temperature range(s) with a resolution of 0.02°C.
The user can configure the digital output to be pulse width modulation (PWM). As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in range of -20 to 120°C, with an output resolution of 0.14°C.
Our temperature sensing solutions are used in a number of medical applications and we are currently encountering a high demand. Therefore the lead time can take longer than usual. It is our goal to deliver on our commitments as best as we can, within the boundaries of what is or will be feasible.
Features and benefits
Small size and low cost
Easy to integrate
Factory calibrated in wide temperature range: -40 to 125°C for sensor temperature and -70 to 380°C for object temperature
High accuracy of 0.5°C over wide temperature range (0..+50 C for both Ta and To)
Medical accuracy of 0.1°C in a limited temperature range available on request
Measurement resolution of 0.02°C
Single and dual zone versions
SMBus compatible digital interface for fast temperature readings and building sensor networks
Customizable PWM output for continuous reading
Available in 3V and 5V versions
Simple adaptation for 8 to 16V applications
Power saving mode
Different package options for applications and measurements versatility
Automotive grade
Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614's high accuracy and resolution. It has a huge number of applications including body temperature measurment and movement detection.
The MLX90614 provides two methods of output: PWM and SMBus (i.e. TWI, I2C). The 10-bit PWM output provides a resolution of 0.14°C, while the TWI interface has a resolution of 0.02°C. The MLX90614 is factory calibrated in wide temperature ranges: -40 to 85°C for the ambient temperature and -70 to 382.2°C for the object temperature. The measured value is the average temperature of all objects in the Field Of View of the sensor. The MLX90614 offers a standard accuracy of 0.5°C around room temperatures.
This devices comes in an industry standard TO-39 package. We're carrying the 3V version of this sensor.
SKS STORE
Additional Information:
- Production Capacity: 10000
- Delivery Time: three days
- Packaging Details: tubes
T Type thermocouple
Temperature Range | 0 to 350 deg C |
Accuracy | +/- 1.0 deg C or +- 0.75% |
Class | Class 2 |
Probe Material | Stainless Steel |
Application | Industrial |
Assembly | Thermocouple Head Assembly |
Mount | Flange |
Probe Termination | Head Assembly |
Country of Origin | Made in India |
Features:
Application/Usage: Industrial
Material: Stainless Steel
Accuracy: Class B
Humidity Sensor Module
Output Type | 0.8V+/- 0.155V |
Interface Type | HTU20D* |
Mounting Type | PCB |
Part Number | 2.7 V DC |
Type | Humidity Sensor |
Supply Current | 0.8 +/- 0.155 V |
Humidity Range | 0 to 100% RH |
Humidity Accuracy | 2% RH |
Signal Output Temperature | +3g / m3 |
FEATURES• Fast Response• Anti-pollution ability• Reliable Performance• Wide Range Built in Network Status LED
Additional Information:
- Production Capacity: 10000
- Delivery Time: THREE DAYS
- Packaging Details: BOX
IR Sensor
Part Number | LM393 |
Sensing Distance | 2 to 30 cm |
Supply Voltage | 3.3 - 5V DC |
Connection Type | Connector M8 |
Body Material | PCB |
Body Style | Rectangular |
Dimensions | 48 x 14 x 8 mm |
Weight | 5 gm |
Detection Angle | 35 Degree |
Average Current Consumption (mA) | 0.06 mA |
IR Sensor module has great adaptive capability of the ambient light, having a pair of infrared transmitter and the receiver tube, the infrared emitting tube to emit a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared reflected back to the receiver tube receiving, after a comparator circuit processing, the green LED lights up, while the signal output will output digital signal (a low-level signal), through the potentiometer knob to adjust the detection distance, the effective distance range 2 ~ 10cm working voltage of 3.3V-5V. The detection range of the sensor can be adjusted by the potentiometer, with little interference, easy to assemble, easy to use features, can be widely used robot obstacle avoidance, obstacle avoidance car assembly line count and black-and-white line tracking and many other occasions.
Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
Interface(3-wire):-
- VCC external 3.3V-5V voltage (can be directly connected with the a 5v microcontroller and 3.3v microcontroller).
- GND external GND.
- OUT board digital output interface (0 and 1).
MQ Series Gas Sensor
Minimum Order Quantity: 250 Piece
Model / Part Number | MQ-2 |
Target gases | lpg gas |
Measuring Range | 10 meter |
Operating Voltage | 5V |
Output Current ( in mA) | 800mw |
Weight | 30 |
Pin Definition | 4 pin |
A gas detector is a device that detects the presence of gases in an area, often as part of a safety system. MQ 6 Gas sensor is used as LPG, Butane and Propane Sensor to generate alarm when there is leakage of these gases from the source. MQ6 is a highly sensitive gas sensor to petroleum based gases but less sensitive to Alcohol and Carbon di oxide. This simple sensor can be installed in the kitchen to give warning alarm if there is leakage of LPG.MQ6 gas sensor is a 6 (Module contains only 3 pins) pin device and it requires 5 volt DC maximum which is derived from a Zener based power supply. There is a heating element inside the sensor which becomes hot at 5 volt and remains stand by. When the sensor detects gas molecules between 100 ppm to 1000 ppm, in the atmosphere, its output turns high
Additional Information:
- Production Capacity: 1000
- Delivery Time: two days
- Packaging Details: box
Soil Moisture Sensor Module
Type | Capacitive |
Operating Temperature | -45 Deg C |
Operating Voltage | 3.3-5 V DC |
Output Voltage | 0 to 5 V DC |
Operating Current | 4 mA |
Soil Probe Dimension | 60mm * 30mm |
PCP Dimensions | 30mm * 16mm |
Country of Origin | Made in India |
FEATURES
• This is a simple water sensor, can be used to detect soil moisture .Module Output is high level when the soil moisture deficit, or output is low. Can be used in module plant watering device, and the plants in your garden no need people to manage.• Adjustable sensitivity by adjusting the digital potentiometer (shown in blue).• Operating voltage: 3.3V~5V.• Dual output mode, analog output more accurate.• A fixed bolt hole for easy installation.• Panel PCB Dimension: 30mm * 16mm.• Soil Probe Dimension: 60mm*30mm.• With power indicator (red) and digital switching output indicator (green).• Having LM393 comparator chip, stable
Interested in this product?Get Latest Price from the sellerContact SellerProduct ImageCompany Details
Additional Information:
- Production Capacity: 10000
- Delivery Time: TWO DAYS
- Packaging Details: PVC BAGE
E18D80NK IR Infrared Obstacle Avoidance Proximity Sensor
Minimum Order Quantity: 500 Piece
Item Model Number | E18 D80NK |
Detection Range | 3-80cm |
Dimensions | 1.7 x 4.3 cm (D x L) |
Output Type | NPN |
Current | 300mA |
Supply Voltage | 3-5V DC |
Connection Type | Cable |
Number of Wires | 3 Wire |
Body Material | Plastic |
Body Style | Cylindrical |
18-D80NK Infrared Obstacle Avoidance Sensor contains an infrared transmitter and receiver which together make up a photoelectric sensor. The sensor has a long detection distance, and has less interference by visible light because it uses modulated Infrared light. This sensor has a screwdriver adjustment to set the detected distance, then gives a digital output when it senses something within that range. This sensor does not return a distance VALUE. It has 3 connecting wires:
Red: +5 VDC
Black: Ground
Yellow: Output-Open collector pulldown( Use 10K pullup resistor to +5V)
It is widely used in robot obstacle avoidance, and many other automation products. The technology behind this effective distance sensor is modulation of infrared light. The receiver is sensitive only to infrared light. Therefore it is not very sensitive to ambient light compared to plain infrared detectors.
Specifications of E18-D80NK Infrared Obstacle Avoidance Sensor:- Power Supply: 5VDC
- supply current DC <25mA
- maximum load current 100mA (Open-collector NPN pulldown output)
- response time <2ms
- Diameter: 17MM
- pointing angle: 15 , effective from 3-80CM Adjustable
- detection of objects: transparent or opaque
- working environment temperature: -25???+55???
- Case Material: Plastic
- Diameter: 17MM
- Lead Length: 45CM
Additional Information:
- Production Capacity: 1000
- Delivery Time: three days
- Packaging Details: box
Melexis Mlx90614 Contactless Ir Infrared Digital Temperature Sensor , -40 To 125 Degc
Model Number | MLX90614 |
Interface | SMBus |
Supply Voltage | 3-5V |
Accuracy | 0.5 Degree C |
Temperature range | -40 to 125 DegC |
Brand | Melexis |
The MLX90614 is an infrared thermometer for non-contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal conditioning ASIC are integrated in the same TO-39 can. Integrated into the MLX90614 are a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.
The thermometer comes factory calibrated with a digital SMBus output giving full access to the measured temperature in the complete temperature range(s) with a resolution of 0.02°C.
The user can configure the digital output to be pulse width modulation (PWM). As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in range of -20 to 120°C, with an output resolution of 0.14°C.
Our temperature sensing solutions are used in a number of medical applications and we are currently encountering a high demand. Therefore the lead time can take longer than usual. It is our goal to deliver on our commitments as best as we can, within the boundaries of what is or will be feasible.
Features and benefits
Small size and low cost
Easy to integrate
Factory calibrated in wide temperature range: -40 to 125°C for sensor temperature and -70 to 380°C for object temperature
High accuracy of 0.5°C over wide temperature range (0..+50 C for both Ta and To)
Medical accuracy of 0.1°C in a limited temperature range available on request
Measurement resolution of 0.02°C
Single and dual zone versions
SMBus compatible digital interface for fast temperature readings and building sensor networks
Customizable PWM output for continuous reading
Available in 3V and 5V versions
Simple adaptation for 8 to 16V applications
Power saving mode
Different package options for applications and measurements versatility
Automotive grade
Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614's high accuracy and resolution. It has a huge number of applications including body temperature measurment and movement detection.
The MLX90614 provides two methods of output: PWM and SMBus (i.e. TWI, I2C). The 10-bit PWM output provides a resolution of 0.14°C, while the TWI interface has a resolution of 0.02°C. The MLX90614 is factory calibrated in wide temperature ranges: -40 to 85°C for the ambient temperature and -70 to 382.2°C for the object temperature. The measured value is the average temperature of all objects in the Field Of View of the sensor. The MLX90614 offers a standard accuracy of 0.5°C around room temperatures.
This devices comes in an industry standard TO-39 package. We're carrying the 3V version of this sensor.
Additional Information:
- Production Capacity: 5000
- Delivery Time: two days
- Packaging Details: packet
Melexis MLX90615 Infrared Digital Temperature Sensor , -20 to 115 DegC
Model Number | MLX90615 |
Interface | SMBus |
Supply Voltage | 2.4-3.3 V |
Accuracy | 0.2 Degree C |
Temperature range | -20 to 115 DegC |
Usage | Home healthcare |
Brand | Melexis |
This devices comes in an industry standard TO-39 package. We're carrying the 3V version of this sensor.
Melexis MLX90615 Digital Plug & Play Infrared Thermometer in an Ultra Small TO-can is an Infra Red thermometer for non-contact temperature measurements. The MLX90615 integrates both the IR sensitive thermopile detector chip and the signal conditioning ASIC in the same miniature TO-46 can. Its ultra small size makes it extremely well suited for medical applications like ear thermometers or other applications where "small things make a big difference". The thermometer comes factory calibrated with a digital SMBus output giving full access to the measured temperature in the complete temperature range(s) with a resolution of 0.02°C. The user can configure the digital output to be PWM.
FEATURES
Easy to use
Factory calibrated IR thermometer with linear digital output
Small size TO-46 can, easy to integrate
Streamlined production
2.4-3.3V supply voltage with power saving mode for battery operation
SMBus interface or PWM temperature output
Performance
Standard calibration in wide temperature range: ambient temperature from -20 to 85°C object temperature from -20 to 115°C
Better than ±0.1°C accuracy in the range 30-40°C
0.02°C readout resolution
Quality
High reliability and long-term stability
Traceability through unique ID number in memory
RoHS compliant
APPLICATIONS
Ear thermometer: fast and easy fever measurement
Body temperature monitoring: monitoring the temperature of patients during operation or people in intense physical effort (athletes, firefighters, soldiers).
Home healthcare: measuring temperature in home use health equipment, 24/7 body temperature tracking
Mobile telephones: The MLX90615 is so small and easy to integrate, it can easily fit into handheld devices
The most prominent application for infrared thermometers, from Melexis, is measuring body temperature to check for fever and illness. There are three main types of IR fever thermometers: ear thermometers, forehead thermometers, and non-contact, distance-read thermometers. Measurement accuracy depends on the calibration accuracy of the thermometer and how accurately the temperature measured on the patient's exterior can be translated into an internal body temperature. For most medical applications, a measurement accuracy of ±0.2°C or better is required.
The MLX90615 from Melexis is the world's first intelligent infrared thermometer integrated into the ultra small TO-46 package commonly used in the manufacture of ear thermometers. This ultra-small and cost effective, non-contact thermometer delivers a fully calibrated digital temperature reading achieved by integrating an infrared sensor with a custom signal conditioning chip in a TO-46 package.
The sensing element in the MLX90615 is a silicon chip with a thin, micro-machined membrane heated by the infrared radiation of the object. This proven Melexis technology has been applied to industrial and automotive temperature measurement challenges for many years. A custom built signal conditioning chip amplifies and digitizes the minute voltages generated by the thermocouples on the sensor membrane and calculates the object temperature using factory set calibration parameters stored in the memory of the chip. The digitized temperature is fully linearized and compensates for ambient temperature. This high level of integration makes the MLX90615 very cost effective compared with previous infrared solutions.
Additional Information:
- Production Capacity: 10000
- Delivery Time: twoday
- Packaging Details: tube
Ultrasonic Sensor Module
Minimum Order Quantity: 100 Piece
Sensing Distance | 15mm |
Material | acrylic |
Model Name/Number | HC-SR04 |
Usage/Application | OT PRODUCTS/EDUCATIONAL PROJECTS/TRA |
Standard sensing object | al object |
FEATURES Range: 2 cm to 5 m. Accurate and Stable range data Data loss in Error zone eliminated Modulation at 40 KHz Triggered externally by supplying a pulse to the TRIG pin 5V DC Supply voltage and Current - <20mACan communicate with 5 V TTL or 3.3V CMOS microcontrollers Echo pulse: positive TTL pulse, 87 s minimum to 30 ms maximum (PWM)
Additional Information:
- Delivery Time: two dasy
- Packaging Details: tray
Proximity Sensor
Minimum Order Quantity: 12 Piece
Brand | omron |
Sensor Type | detector ranging sensor |
Part Number | all part available |
Sensing Distance | 5mm |
Material | Stainless Steel |
Model Name/Number | all model available |
Usage/Application | Industrial |
Additional Information:
- Delivery Time: 2 TO 3 DAYS
- Packaging Details: pvc packet
Vibration Sensor
Minimum Order Quantity: 250 Piece
Power Consumption | 3.3V |
Range | IN ALL RANGE AVAILABLE |
Brand | IN ALL BRAND AVAILABLE |
Type | PCB |
Model/Type | VIBRATION SENSOR |
Sensitivity | SW-520D |
Item Weight | 20g |
Power Source | Battery Powered |
Country of Origin | Made in India |
This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. This sensor works on 5v. It gives Digital high (5V) output whenever vibration is detected. The Vibration Sensor Detector is designed for the security practice When Vibration Sensor Alarm recognizes movement or vibration, it sends a signal to controller.
It works on electromechanical principle. Vibration velocity sensors operate in accordance with the electrodynamics principle and are used for measuring the bearing absolute vibration based on the piezoelectric effect. Change in resistance due to the force acting on it and convert it into 4 -20 mA. We have piezoelectric sensor which detects the vibration created on the surface. We can also use shock sensor to detect vibrations.
FEATURES
• Operating voltage: 5V DC
• Output pattern: digital pulse
• Frequency Range: 0.5HZ ~ 20HZ
• Low cost
ADVANTAGES
• Since the output is of digital pattern it is easy to use
• Immune to water and oil on the object surface
• High stability, with few secular changes
SKS STORE
Additional Information:
- Production Capacity: 1000
- Delivery Time: TWO DAYS
- Packaging Details: BOXS
PTC Thermistors
Minimum Order Quantity: 10000 Piece
Operating Temperature Range | -40degree C to 85degree C |
Thermistor Mounting | Disc Type |
Surface Finish | Epoxy Coated |
Resistance Tolerance | +/-25% |
Thermal Time Constant | 14s |
Wire Connection | Through Hole |
Most PTC thermistors are of the "switching" type, which means that their resistance rises suddenly at a certain critical temperature. The devices are made of a doped polycrystalline ceramiccontaining barium titanate (BaTiO3) and other compounds. The dielectric constant of this ferroelectric material varies with temperature. Below the Curie point temperature, the high dielectric constant prevents the formation of potential barriers between the crystal grains, leading to a low resistance. In this region the device has a small negative temperature coefficient. At the Curie point temperature, the dielectric constant drops sufficiently to allow the formation of potential barriers at the grain boundaries, and the resistance increases sharply. At even higher temperatures, the material reverts to NTC behaviour. The equations used for modeling this behaviour were derived by W. Heywang and G. H. Jonker in the 1960s.
Another type of PTC thermistor is the polymer PTC, which is sold under brand names such as "Polyswitch" "Semifuse", and "Multifuse". This consists of a slice of plastic with carbon grains embedded in it. When the plastic is cool, the carbon grains are all in contact with each other, forming a conductive path through the device. When the plastic heats up, it expands, forcing the carbon grains apart, and causing the resistance of the device to rise rapidly. Like the BaTiO3 thermistor, this device has a highly nonlinear resistance/temperature response and is used for switching, not for proportional temperature measurement.
Yet another type of thermistor is a silistor, a thermally sensitive silicon resistor. Silistors employ silicon as the semiconductive component material. In contrary to the "switching" type thermistor, silistors have an almost linear resistance-temperature characteristic.
Additional Information:
- Production Capacity: 10000
- Delivery Time: two days
- Packaging Details: reels
Power Mate Wire To Wire Connector
Minimum Order Quantity: 1000 Unit
Contact Material | Brass |
Connector Type | Male |
No. of Contacts | 2,3,4,6,9,12,15 |
Type | Female Housing Male CONTACT PCB Mounting Straight |
Power Mate Connectors | Wire to Board Connectors,Wire to Wire Connectors |
Pitch | 6.35 mm |
Additional Information:
- Production Capacity: 10000
- Delivery Time: TWO DAYS
- Packaging Details: PVC PACKET
Rain Drop Detection Sensor Module
Sensor Type | RAIN DROP SENSOR TYPE |
Additional Information:
- Production Capacity: 1000
- Delivery Time: three days
- Packaging Details: box